Fix Bosch DHE645MGB cooker hood?

Many thanks for your help. The first time I put a multimeter across the fuse in the plug at the supply socket, it registered as a closed circuit, so I assumed it was ok and the fault elsewhere. I have taken the fuse out and tested it again and find it is an intermittent open/closed reading. The fuse has been replaced and the hood now works perfectly.
Dave

Dave Haynes
January 2014

Hi CK, ~I have checked the 13a fuse in at the plug in the cupboard mains socket. This is fine and the microswitch that trips when the hood is opened and closed is fine, showing correct making/breaking as it operates. The power from the mains enters the hood at the rear into a white box, from which spades at the front take the power to the lamps and the rocker switch. The live/neutral terminals coming out of the side of this box do not show any voltage. Is it possible this white box (distribution box?) is faulty and how do I get a new one. It would be good if I could email a photograph I have of the inside of the hood - can I have your email?
Thanks, Dave Haynes

Dave Haynes
January 2014

should be a 3A fuse somewhere that may of blown if installed correctly.If its been installed incorrectly with a 13A fuse it might of burnt tracking out on switch pcb

CK
December 2013

you need to test if you have power to the extractor hood first.this require a multimeter

CK
December 2013