where can i obtain a dimmer switch?

Paul's the Man on this. I saw this article when I was looking for a replacement for my blown HY3660B dimmer and sent it to Paul for repair. It was back working within days! Great price and fantastic service! Would recommend Paul highly.

JRaz
April 2017

I have found this forum to be a life saver many times but found hytec 3360d for my light at savemylight.co.uk. Came straight up in a google search.

Ibrahim
August 2016

Just to add to the thread below, I can highly recommend Paul's service - he fully soak tests the units before returning them and is as good as his word! (Even provided photos and detailed rewiring instructions for an electrical novice like me!)

Mr R Coleman
January 2016

Hi Paul, Do you still repair HY-3360D switches ?

Mick
June 2015

Fraser ring me on 07514874120 and I will get your e mail address and send you details repair is £12 +return postage of £3 in UK

Paul ( Northern Ireland)
February 2015

Paul,

I have a Hytec 3360C dimmer switch that is faulty. Can you advise if you can repair this switch and if so, what would be the cost and where should i send the switch. Thanks.

Fraser
February 2015

If the Dimmer is an HY3660b send it to Paul in Northern Ireland and he will repair it good as new. That's what I did. Excellent service and real quick. You can definitely trust him, I did and he did a great job really quick. Fantastic value too. Thanks a million Paul. Very satisfied.

Karl from Hampshire
January 2015

Ken I can fix the unit or supply you a kit of parts to effect the repair yourself

Paul
December 2014

Hello what type of triac is used at this Hytec 3360D dimmer? I cannot see label of this triac.
Thanks a lot!

jader
November 2014

I can repair these Hytec 3360 Dimmer Controls for £12 + return postage if you want to send it to me. Or if you feel confident with doing the electronic repair yourself, I can supply a kit of parts for £6.50 + carriage of £1, with instructions, but you will need a soldering iron, a drill to remove the Triac existing pop rivet to get the heat sink off and a pop rivet gun to rivet the heat sink back on after replacing the Triac.

Paul ( Northern Ireland ) 07514874120
August 2014

Replacment parts are not available for mother and child lamps. However i can do modifications to these lamps to get them going again

Rick Voce 0412 541 731
October 2013

http://www.savemylight.co.uk/kd323c.html#.Uj2VujZwbwo

Bob
September 2013

when a bulb blows the back emf can take out the thyristor in the dimmer,as peccavi has said,you wont get a dimmer to replace the fitted one,but,you can get an in-line dimmer you just fit to the mains cable on your light,it has either a slider control,or a small rotory switch,

mm
June 2013

Ah! - It's just dawned on me...

It's not you mother and your child that wrecked the bulb - the bulb and the dimmer in your Mother-and-Child lamp have failed. Where can you get a replacement dimmer to fit?

I doubt you will.

A new lamp or arrange for an external dimmer I would guess. Ignore my previous - total rubbish.

Good luck...

Peccavi
June 2013

It is rare for a mother and grandchild to conspire to destroy a light bulb - light bulbs usually destroy themselves.

You can get a dimmer switch at most places that sell regular switches - electrical shops - DIY stores.

Be sure that you take note of all the lamps connected to that dimmer - add up their total Wattage.

The number on the switch has no special significance.

Peccavi
June 2013