Recent: McCulloch gladiator 550?

Mend Scantronic 9751 Home Alarm Systems

Mend Security Systems, Home Alarm Systems
Find out how to mend it for free.
Ask Question
Mend Security Systems, Home Alarm Systems
Mend repair fix Scantronic 9751 home alarm systems

Related Categories

Mend Car Alarm Systems
Car Alarm Systems

Mend > Home Alarm Systems

Mend Security Systems, Home Alarm Systems

9751 alarm with tamper fault?

Folks,

I have inheritted an alarm system with the purchase of a new house. It's a Watson Alarm system but it's basically a Scantronic 9751 system with 9930 control panel - rebadged.

The 9930 had a broken tamper switch so acquired a replacement.

I have the install and user manual but it seems the defualt engineer code has been changed, I presume by Watsons, so I cannot reset the damn system to use it.

I believe there may be a way to reset the system (shorting pins) but will this just reset the codes or the whole system back to factory defualt and thus require complete re-progarmming from scratch.

I have no paper work to tell me which PIR or door entry/exit sensor is on which Output (but could work this out by process of elimination).

Basically can someone help me out here please.

chris
May 2013
Scantronic 9751Security Systems, Home Alarm SystemsTamper System House
well if he comes back on here he can "dell" its mandarine for f..k off he get no more help from gts

gts
May 2013
Yep don't it mate,ive been checking regulary and nowt!!,

Why we bother?

e manno
May 2013
nothing,just brill e manno,not even a thank you guys for your imput,...makes you weep,dont it ?

gts
May 2013
we all know this panel is very easy to programme its fool proof ,if you know what you are doing ,we shall see mate,hope he gets it sorted,we have tried our best to help,its up to him now

gts
May 2013
It would be brill :)

If he follows the advice given and reads and understands the book then he will be ok.

Some people can learn to play the piano from reading a book but most haven't got a clue,

the balls in his court gts and I hope he or a friend of his can sort it,but most of all I hope he comes back to say he has been successful and he offers his thanks.

e manno
May 2013
do you think he will get back to us ?????the suspence is killing me ha ha

gts
May 2013
and fools seldome differr !:-)

gts
May 2013
He he mate great minds think alike :)

e manno
May 2013
me wanted to sound like a smart guy !!!!!!:-)

gts
May 2013
aw emanno,you steal me thunder me wus gonna tell him to replace the battery,u scoundrel u ! :-)

gts
May 2013
1st stage reset, as gts has said read the book,

you only need to default user and engine code,

If you choose to refresh the nvm then you have to reprog the panel.

as gts has said choose wisely :)

Great panel by the way and whilst you in there you could also treat it to a new backup battery unless the battery is dated and less than 4years old.

e manno
May 2013
one last thing,one set of pins will default the panel to the original factory codes,so you can set your own,the other pins will return the panel to factory settings,(you will need to reprogamme all the zones),choose wisely my friend READ THE BOOK

gts
May 2013
if you have any probs get back to us,myself or any of the guys on here will sort u out

gts
May 2013
they should have put the zones on back page but all is not lost,when you put the codes back to factory defaults,1234,user,07890 engineer then put the panel on walk test get someone to walk through the house take note of what zone lights up,mark it down on back page,bobs your uncle,now just put in your new pin number,your sorted :-)follow the engineers instuctions to the letter

gts
May 2013
thats a very good panel mate dont buggered it up by not knowing what your doing

gts
May 2013
depends on what pins u short read the manual,its all there

gts
May 2013
if you have the engineering manual it will tell you how to do it,we dont give out defaulting info on here for obvious reasons

gts
May 2013
Mend Security Systems, Home Alarm Systems
Mend repair fix Scantronic 9751 home alarm systems

Other models...

Scantronic 4600Scantronic 9200Scantronic 9427Scantronic 9448Scantronic 9450Scantronic 9454Scantronic 9500Scantronic 9600Scantronic 9651Scantronic 9752Scantronic 9800Scantronic 9827Scantronic 9930

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.

Mend home alarm systems ...

Mend Security Systems, Home Alarm Systems

Optima plus2?

have a optima plus 2 alarm had a power cut alarm now is showing zone 1 flashing but keypad is not working b... [Read more]
Mend Security Systems, Home Alarm Systems

Thorn tc3800 house alarm?

How to fix bf fault
Mend Security Systems, Home Alarm Systems

Cooper Scantronic 9448 alarm?

Have a Cooper Scantronic alarm system . Instruction book say 9448+ but front of small control box by entry is ... [Read more]
Mend Security Systems, Home Alarm Systems

Missing key Logic 4?

Hello my mother passed away and i am unable to find the Logic 4 alarm key. I dont know the key number so i am... [Read more]
Mend Security Systems, Home Alarm Systems

Yale alarm app requires password/login?

I have a Yale IA-320 alarm system and use the Yale app on my Android phone. The app periodically requires you... [Read more]
Mend Home Alarm Systems
Mend Security Systems, Home Alarm Systems
Mend repair fix Scantronic 9751 home alarm systems