Other users of howtomendit.com provide the answers. The more detail and information you provide in your question the easier it is for others to help you.
The 1000 was installed around 4 years ago for his wife. She sadly passed away at the beginning of December & the lift has remained used (& unfortunately powered off) until now. It's now dead.
I have accessed the batteries & both are flat but there is also little to no charging voltage present. 1.2V on one side & nothing on the other. Should there be a charging voltage present or does the charger detect that the batteries are unable to take a charge & so shut down?
There is around 33V present on the charging points but it looks like the chair may have slightly overshot. Now I know where the manual winder goes I'll try winding it back.
Is battery replacement a feasible DIY job? I think I read on another thread that the chair needs to come off the track which requires a special tool.
Just to add that winding the chair manually to the middle of the charging points has made no difference. Forgot to say originally that the LED display is also dead.
Non-working Minivator 1000?My minivator 1000 was just reinstalled in my new condo. After fixing a few problems that were quite obvious and replacing the batteries, power up shows the - in the diag window but it doesn't move. looking at the pcb I see the LED is flashing red. It mentions the OSB in the Fault Analysis chart as b...Click here for the fix.
My Minivator 1000 is stuck ?My Minivator 1000 has gone unused since my father passed away. We have had it for three years. The lift got jammed and is now stuck halfway up the staircase. there is no power going to the chair . I have checked the circuit breaker and made sure that the the receptacle is working. I cannot locate ...Click here for the repair.
Minivator chairlift removal?How do we detach the chair from the track on a Minivator 1000 ?...Click here for the repair.
Minivator 1000 stair lift stuck at the top of the stairs? help?stair lift worked on the way up the stairs ,but wont come back down ?
any ideas ?...Click here for the repair.
Minivator 1000 stairlift?The led next to the switch is flashing, does this mean it's charging or what ?...Click here for the repair.
ERROR 2 ON Minivatotr 1000 Stairlift?Does anyone know what the No 2 error code is on the minivator 1000. Not sure what led to my parents chair breaking, but having just replaced the batteries it now shows a blinking 2 ?
Thanks...Click here for the fix.
code numbers?could you supply me with a list of meanings for the various code numbers shown on the display next to the on/off switch.My stairlift is a minivator 1000.manufactured in 2008 I think.Many Thanks Bob...Click here for the fix.
minivator 1000 stairlift?Hi i have just bought a second hand minivator 1000 everything works great until i try to get the thing tio come down ive looked under the footplate and the switches seem fine , does anyone have any ideas on how i can fix this so my daughter can get down as well as up the stairs plz Joanne x...Click here for the fix.
Attempting
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.
2003 vE