i have a dyson dc04(green) two spade switch upright hoover theirs four wire?

Hi,

Cut/paste the link below in to Utube and it will show you how to make the repair.

http://youtu.be/qAUj3ZLwgdw
Don't forget to unplug it first.

Regards,

Jon
April 2014

i have exactly the same issue. they donot sell the double pole switch any more and i am at a loss as to how to fix this issue

CHANDRA sHARMA
January 2014

Dysonmedic dot com has excellent articles and pictures.

In the DC04 section the switch clearly has four connections - Live & Neutral both switched - a Double-Pole switch.

If your replacement switch has only two connections then it's a single pole switch and unsuitable - you have the wrong switch.

Are you absolutely sure the switch is defective? Has its operation been properly checked/tested?

A common fault in vacuums is a broken wire inside the cable near the plug - cut off about 6" and fit a new plug - often works wonders.

Good luck...

Peccavi
February 2013