The boiler works with no logout. The lights operate as per the manufacturers manual. After 60 seconds the boiler switches off.
The boiler will start again when required to heat the central heating rads.
Could the problem be the temperature sensor ? Or is it the PCB
potterton 16/22 pilot lihght out?There is no gas getting to the pilot light. How do I turn on the gas to it to light it?...Click here for how to mend it.
my boiler power light is flashing?i have a potterton performa 24e and the power light is flashing.i have no hot water.the bar is just above 1 although up to a couple of weeks ago it was averaging 1.5....Click here for how to mend it.
Not hot water?Potterton Promax 15 SL
With wall control PS2 dual channel control.
Shows light heating timed
Heating set to off so with H water set to timed the boiler should fire up when it senses hwater heat needs to be topped up, it isnt. Test: Both heating and hwater lights were set on timed still no boile...Click here for how to mend it.
My radiators will not go off.?My potterton kingfisher mf100 will not turn off, even though the programmer is in the off position for both water and heat but the radiators will not turn off. The only way I can turn the boiler off is to turn the switch off on the boiler. What can be done to cure this problem....Click here for the repair.
Is it easy to replace thermostat on potterton profile 80?Boiler fires up when I jam thermostat knob with a piece of wood from below i.e. The knob moves up and down enough to lose contact....Click here for how to mend it.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.