My Hygena AHY8101 dishwasher cycle is running but does not stop?

Your answer is spot on, thanks, helped me out that one

Tim

Tim Isle
November 2007

your sequencing mechanism is jammed. take off the black plastic splash board at bottom front of dishwasher (make sure you unplug machine 1st). To the left you will see a metal component with wires coming out of top (sequencing unit). In the centre you will see a plastic spindle (mine is green) turn this with a pair of pliers one click clockwise, that should free it. Try the machine again. Each click clockwise is a sequence in the cycle. When the arrow is pointing up at the 12 oclock position then the machine should switch off. If the fault keeps happening try a new timing unit from INTER-SPARES on the net.

Craig Hunt
December 2006