Recent: McCulloch gladiator 550?

Mend emachine Desktop PCs

Mend Computers, Desktop PCs
Find out how to mend it for free.

Ask Question
Mend Computers, Desktop PCs
Mend repair fix emachine desktop pcs

Mend > Desktop PCs

Mend Computers, Desktop PCs

power to computor emachine 420 running xp?

computer starts to boot when switched on at the mains mrroutethen switches off before boot complete, fan stops, flashing led stops flashing and remains on,no signal displayed on monitor .

computor is set to remain switched on at all times. started to switch off after approx 1 hr then decreased in time until now it will no longer boot any advice pse

mrroute
November 2012
Fans stopping, especialy if it include the power supply fan, mean that the power supply disjoncted, usualy from overheating.
It looks like there is a problem with your power supply. Initialy, it was probably only overheating due to dust buildup, but, over time, that heat seems to have caused some other damage.

If that's the case, you need to replace the power supply. Chose one with approximatively the same power rating as the original one.

You may also have dust buildup on the CPU heat sink, or it's fan no longer work.
Open the case. Using a can of compressed air, blow away any dust in the CPU heat sink. Power up for a few seconds to see if the fan do work. If it don't work, replace the fan.

Electro
November 2012

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Running Computer Boot

Mend Computers, Desktop PCs
Mend repair fix emachine desktop pcs

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Computers, Desktop PCs
Mend repair fix emachine desktop pcs