Yes, not exactly hard to work it out. If no marking next to the valve H or C then connect up the 2 hoses. Select a cold only wash & turn on only the cold tap. If water enters the machine they are correct. If no water enters open hot tap. If water now enters then they are wrong way around. Just swap ends over at tap end.
Lincoln Appliance NZ
April 2012
Dont know this particular machine but if you connect the pipes then set rinse if the water coming in is hot the pipes are the wrong way round
Kenjo
April 2012
I can answer this question...
which water inlet is hot and which is cold on the Ariston Margherita 2000 ?