changing blade on makita jigsaw?

Cant undo my bolt holding jigsaw blade.

ingrid
July 2014

Magic Keith

Your instructions worked perfedctly for me, thought I'd bought a runt with a broken blade and that's why it was cheap. Didn;'t notice when i purchased it but following your advice I have now sorted the problem and just wanted to say big thanks to you and this forum.

Jan

T21BAL
April 2011

thanks a lot kieth. i too have been stuffing around with the blade for the past 2 days. my dear old dad who is 80 has given me his tools with no instructions. thanks again!

eddy karalis
November 2008

if you go to makita.com you can get all the manuels for all thier tools

mick
July 2008

the platic shield on the front twists round then your blade will drop out then put a new blade in the same way but with blade pointing outwards

mick
July 2008

Go to this page for instruction manual http://www.radionics.ie/electronic-components-ie/1/41801-JIGSAW-230V.html

Lachie
July 2007

I have had the same problem! I have been searching the internet for the manual so far with out sucess. However I went back to the saw and was able to install a new blade. This is how:
1. Slide the button on top of the saw out, forward away from the body of the saw.
2. Rotate the button anti-clockwise - unscrew it. The jaws open and the remains of the old blade will come out.
3. Insert new blade and rotate the button clockwise to close the jaws and clamp the blade.
The saw is now ready for use.

Keith Rowe
December 2006