citadel xri?

The fuse to the left protects the STROBE +ve terminal 19,the Bell +ve terminal D and the 13v +ve terminal 21

The fuse to the right is in the - ve battery line and prevents excessive current being drawn from the battery,

The fuse will also blow if the battery is inadvertently reversed polarity connected during installation.

no name
February 2012

Don't know where you get that info from acorn,there's only two fuses on that board.

1.6A BELL/STROBE /13v

1.6A BATTERY

no name
February 2012

There are four fuses mounted on the circuit board, all are 20mm quick blow.

F5 1Amp Bell/strobe
F3 1Amp 13v/Speaker
F1 1.6Ah Battery

F2 1Amp Keypad

acorn
February 2012

Care to tell him which one in case the strobe is running.

Alarm
February 2012

hi,
isolate the power to the panel and check...

-ve battery line fuse
1.6A 20mm glass quick blow.

If the fuse is intact you have a battery issue

The fuse is one of two mounted onto the pcb,the other fuse is for the strobe.

no name
February 2012