Tip: Use a 5p piece, unscrew the head of the valve, insert a 5p piece into the bottom of the head, re-attach it to the valve body and then turn it to zero (Only good for very short term disconnects)
Don't forget to turn the other end of the rad off as well ;)
ccMods
July 2006
no you need to unscrew the thermo valve so you are just left with the brass pin sticking up in the middle and you should have a plastic cap usally blue and screw that on to where the thermo screwed on .if u dont have the cap u can get them from places like plumbcentre. just by shutting valve to zero does not shut the valve completly.
HI-SPEC PLUMBING
July 2006
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
