after a power failure, when power was restored, there has been no control of alarm at remote key pad also no day or attack indicate led's showing. The background lights behind digits 1-10 are illuminated so i know that the keypad protection fuse is ok.
Is it the keypad faulty (my guess) or is it the main pcb board?
itadel alarm keeps going off when not set entered code to stop then locks out with day & power lights on with tampa light anyone help
jeff
June 2015
After a power cut all power to the alarm system is dead.The keypad is dead although the sensers in the rooms are still active.Please can you advise ?
Ladyann
July 2010
Top man donbar, replaced the battery and it has sorted the problem out. The old battery had been pulling the voltage down from the key pad.
You've saved me the price of a new key pad, I owe you one mate, cheers
silence of the alarms
January 2010
Try the battery angle first you want a 2.1amp 12v, when you power up, first place leads on battery terminals then the mains do it in that order and it should come to life.
donbar
January 2010
cheers dunbar,
but with power restored the key pad won't operate,the illuminated lights on each digit 1-9 glow, but the attack or day indication lights are out.
I take your point about the back up battery, as it did not hold out during power failure and panel is in about 8 years old.
silence of the alarms
January 2010
Possibly be the back up battery with Alarm panel, how long has it been installed? Normally after power cut if the battery is good key your code in and press reset. may need an engineer if not
Donbar
January 2010
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
