i have a 1989 cadillac deville i am trying to ajust the tps on the throttil body
shaba March 2010
how do you ajust the tps on a 1989 cadillac deville 4.5
shaba March 2010
If its low on ATF it will slip cold and improve as it expands on warm up. Both forward and reverse are affected. If the filter is restricted it will get worse when hot. Also in Forward and Reverse. Switching off for a few minutes will momentarily work until restricted again.Too much ATF will cause foaming and therefore slip, again when hot. If the filter is clogged the trans is shot. Check out -www.fedauto.co.uk
mags November 2009
Hey Rick: Your problem could be as simple as a cloged filter in the transmission, and then it could be the shifting bands slipping either way you need to have the transmision serviced by someone who knows what they are doing. the transmission can be a costly piece of equipment. so please DO NOT let just anyone mess with it. especilly on your caddy: Please! from one caddy man to another!
Need help with OBD codes and where to start?I have a 93 cadillac deville the OBD says the following code errors:
E26 - Shorted Throttle Signal Switch
E31 - Shorted MAP Sensor
E48 - Exhaust Gas Recirculation Sysyem Problem
E52 - PCM Memory Reset
E55 - Closed Throttle Angle Out Of Range
E75 - Intermettent VSS Signal
E91 - PRNDL Switch P...Click here for the repair.
any solutions other than head gasket r&r?stop leak?.... or som other methed dont have $ to fix it right(95 cadillac) ?...Click here for how to mend it.
Fuel pump ?Is it possible to remove the fuel pump from under the back seat of a 1995 Cadillac Deville...Click here for the fix.
can i remove the cadillac converter?my car is spittin and sputterin ive changed the plugs and wires can i cut the converter off and weld in a pipe and is there an o2 sensor that i will mess up? it is a 200 grand am with a 2.4l engine...Click here for how to mend it.
my cadillac converter is getting hot?my cadillac converter is getting red hot and what is a core pack...Click here for the fix.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.