light won't stop flashing?

I have the same problem. The reset thing seems to work if I persist going throught the process several times. But then when I put in another wash the process has to repeated again. Also it seems the wash sometimes stops before clothes have been rinsed so I have to put them on a rinse cycle. This is all VERY tedious and I thinking of getting a new machine.

Joe
May 2006

This reply has been posted elsewhere on the forum, I have just used it and works perfectly.

Have had the same problem, prewash light flashing right hand side of machine. The shop I purchased machine from have spoken to their Engineer and it's a case of re-setting the machine. Have told me how to do it and the machine's working again - fingers crossed!
Turn power button off (not at wall)
Select 90 degree wash
Press Start and Cancel button down at same time for 3 seconds and turn power button on whilst still holding buttons down - Start light will flash.
Leave power on.
Select any Spin position.
Press Start and Cancel button at same time again for 3 seconds - other buttons may start to flash - if they do, press Start and Cancel button together again for 3 seconds.
Machine should be re-set ready for use.
Good luck!

Nikki
January 2006

I also have a beko wma17155 and I am experiencing the same problem, have you solved yours.

nmcollman@aol.com
January 2006