I have a glow worm 60 FF with a intermittent fault that results in my heating staying on all night.
I have a external controller programmed to switch the heating on twice a day. Plus a thermostat that also has 2 temperature settings, allowing a lower temperature durring the middle of the day and night. This effectively acts as a second programmable controller.
The boiler always appears to switch of correctly after running for a few hours in the morning but most of the time fails to switch off after runniong for 5 or 6 hours in the evening.
I have tried many different combinations of settings on the 2 controllers to prove they are not causing the problem and I am reasonably sure it's the control card but every time I try to fault find the fault clears.
Before I buy a new control card just wondering if anyone else has had a simillar problem.
if this blr is a micron check u have a capacitor between swithed live and neutral ,and if u r on a y plan system,the capacitor will stop any external voltages coming back to the blr so the blr will go off
alex manton
November 2005
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
