Recent: Remove cover plate on patio door?

Mend Snapper Lawn Mowers

Mend Garden Tools, Lawn Mowers
Find out how to mend it for free.

Ask Question
Mend Garden Tools, Lawn Mowers
Free repair help for Snapper lawn mowers

Mend > Lawn Mowers

Mend Garden Tools, Lawn Mowers

whats wrong with my engine?

i have a briggs engine it won't start.i have replaced spark plug rebuilt carb checked valves for sticking the engine has good spark gas coming to carb.i also replaced gas line and filter the engine seems to have good compresson. it wont start using starting fluid either.the engine is on a snapper mower.its old i don't know the h.p. of this engine. any suggestions would be appreciated.

jerry
September 2005
Hi Jerry,
Check your magneto,sand off any rust with 100 grid sandpaper
check gap between magneto and flywheel,it should not be bigger than the thickness of a match book cover.Always works for me.
Good Luck
Joseph

Joseph
September 2005
Hi Jerry,
I would suggest you check the timing.To do this you have to remove the nut on the flywheel to see if the small key between the wheel and the shaft is sheared . If it is even partly sheared it will throw everything off and it won't start.
Good Luck

JOHN @ RONA
September 2005

Automatic Answer

We may have found other answers which could help you.

Click here for Whats Wrong Engine

Mend Garden Tools, Lawn Mowers
Free repair help for Snapper lawn mowers

Other models...

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Garden Tools, Lawn Mowers
Free repair help for Snapper lawn mowers