cannon chichester main oven flame stays low?

Dirty burner, ffd phial in the wrong place or faulty ffd

Andygas
December 2011

how can i repair thelow oven flame

william warnock
March 2010

i am a corgi engineer and would say the fsd is failing to operate correctly.

Simon (Pure Gas)
November 2008

not ffd if flame stays on.it is the oven thermostat

andy
October 2008

Had the same problem myself. Changed the FSD unit but it didnt solve the problem. Read the manual - it reminded me that the control knob should be pushed in before turning. Have been doing this - doesnt solve the problem most times BUT if I turn the oven off after the (low) flame has been alight for a minute or so and immediately turn it on again all is well (may have to do this a few times). Wasted two FSD's before I discovered this. I was sidetracked into thinking that the FSD was faulty because it was possible to persuade the device to work by heating it with a blow-torch!

Ken Lewis
July 2008

FFD broken needs replacing. no doubt about it

ian
June 2008

FFD broken needs replacing. no doubt about it

ian
June 2008

the fsd is knackered or the sensing phial is not in the flame

iain
June 2008

Possible faulty flame sensor device

Joe
June 2008