fuel line assembly for Ryobi Grass Scorpion RCT2800A?
I am replacing the fuel lines for my Ryobi Grass Scorpion and forgot to record which pipe went where before I ripped it apart. Please, which pipe to which spigot. It has a Zama carby with two spigots, and a primer with two spigots and two spigots in the fuel tank.
Thanks.
Well I figure that with two hoses, there must only be one of 2 ways they go back on.
How many guess's do you want?
suffer not foole
December 2008
farshad, you are wrong.
The line from the tank goes into the longer inlet, and the line into the carbie goes into the shorter inlet.
Luke
June 2008
hi
i made a mistake fuel line from tank goes to primer inlet which is shorte one on top of it writen "in" and come out from other end of primer then connec to spigot at butom of carby ( L shape one
farshad
September 2005
hi
your outlet from feul tank goes to primer inlet (shorter one)
and other hose one end should be connected to the free end of primer(longer one ) and the other end to the spigot (brass color one) on top of carby and the other one end connecte to
spigot at the buttom of carby and other end goes to fuel tank
good luck
farshad
September 2005
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
