JvC video recorder?

oh ...and don't forget .... the Samsung has 2 TV tuners in it, use the Analogue tuner (the normal one) not the digital one

Jason
January 2008

the answer is a bit crazy but here's how:

Method 1. connect it into your DVD recoreder or VCR and select the input on either the VCR or DVD recorder.

Method 2.
you need:
1x RF modulator (found in most hifi stores)
1x 2way TV splitter (find in hifi shops or hardware shops)

1. Take the antenna lead (that runs to your TV set ... leave one end in the TV) out of the wall and plug it into your 2way TV splitter where it says "out" * note. the splitter will have one input and 2 outputs, use one of the outputs.
2. connect an antenna lead to the "in" part of the 2way splitter and connect the other end back into the wall
3. connect an antenna lead from the other "out" on the 2way splitter and the other end to the RF modulator.
4. the RF modulator will give you RCA plugs - plug your camera into them
5. find a channel number that you want your Video recorder to show up on, go to that channel and manually tune that channel to see your video camera (leave the camera on while doing this - it's needs to be in recording mode but not recording)
6. once you find it, store the channel.

Jason
January 2008