Mend Beko Televisions

Find out how to mend it for free.

Ask Question

Find out how to mend Beko televisions

Mend televisions ...

Mend Televisions

Mend > Televisions

how can i fix my beko idtv 28c723idw?

i have lost all of the digital channels and there is no `digital setup`in the menu`s?ie no way of tuning them in again..

Robert
April 2007

Beko Video, Televisions Digital Channels Tuning

I have the same problem (it never really has worked all that well) and now mine switches off by itself too. The last time it did play up I unplugged all the leads and depressed the "on" button for 1 minute - fired it all up again and the digital tuning option re-appeared. Doesn't seem to work this time though.

Richard
February 2010

Yup same problem. Tried the internet to find a solution but both sound quite troublesome.

Benji
December 2009

scrap it ive got one too

bot
July 2008

My Beko did this too.

Apparently it's a faulty digital decoder board inside. Only 2 ways to fix this and both need a Beko approved engineer to do it:

1 - Reload the firmware.
2 - If '1' fails, replace the board.

Give Beko service a ring and they should sort it out for you.

Stuart Judd
August 2007

i have got the same problem can only get channels 1-5. its as if there is a problem with the digital reciever in the set

bob
August 2007

I've got the same problem, its only just developed.. Anyone got any support ideas on this?

Alex
July 2007

My identical model has done this too. Its well annyoying! Seems a common fault!

William
May 2007

I've had the same problem within the last 2 days. I notice in the manual that channels 1-899 are assigned to digital channels, 900-999 to analogue. Now only channels 1-99 are available on the TV...

Steve
April 2007