My White Knight wont tumble although heat is still being generated and appears if motor is till working. Ive opened the bak of the machine and when you give the drum a wee push it goes (until it stops again). The belt appears ok.Can anyone help?
As Keith the spin doctor said its the capacitor. My tumbler went wrong over christmas found keiths suggestion and ordered a capacitor noted four wires brown and yellow from timer? and brown and yellow to motor. Checked connections from my sketch before taking apart and paired ins and outs.
Now works fine thank you keith.
Nick
nick
January 2005
THIS IS DEFINATLY THE CAPACITOR! CHANGE IT AND IT WILL BE FINE.IT'S LOCATED DOWN BY THE MOTOR ,CYLINDRICAL WITH 2 WIRES ON IT!BE CAREFUL,PULL MAINS PLUG OUT AND TURN THE MACHINE ON TO DISCHARGE ANY POWER LEFT IN THE CAPACITOR FIRST BEFORE REPLACING IT.
KEITH[SPIN DOCTOR]
January 2005
tried with no load but still not turning.when i said motor appeared ok i maybe should have said that the machine sounds normal.....apart from it not turning/tumbling....any suggestions ?
GAZB
December 2004
your motor is not able to turn the load try it with no load if this works motor is \\\\\\\\