Sorry, not clear, you say fills, stops then starts fill cycle again. What about emptying between? If not, could be water level switch. inside m/c, a pressure switch, usualy to top of m/c about 2.5 3 inches diameter, 2 wires, and a pipe. Pipe will go down side of drum to a connection at base of outer drum. Sometimes gets blocked with detergent at bottom end, So m/c does not know water level. Pull off of pressure switch and blow down pipe, If you can feel a pressure, blocked, so blow harder, should clear, if not get to bottom end of pipe, disconnect, clean out, refit. IF not this repost.
SD
January 2012
howtomendit.com for free repair help, information and advice.
