Recent: Charger fault?

Mend Veritas 8 Home Alarm Systems

Mend Security Systems, Home Alarm Systems
Find out how to mend it for free.

Ask Question
Mend Security Systems, Home Alarm Systems
Mend repair fix Veritas 8 home alarm systems

Mend > Home Alarm Systems

Mend Veritas 8 Keypad Key Pad

veritas 8 keypad no power?

we have a Veritas 8 alarm, this morning it went off, I went to reset it but nothing worked, the light on the key pad is not on and the buttons make no sounds when pressed, I went to the control panel and the LED is flashing, do I need a new battery? It eventually stopped going off and the light has stopped flashing but the key pad is no longer working, although the back light to it is still on any ideas?

Simpson
August 2010
My keypad appears dead, the alarm activated in power cut, power now on but keyboard does not work.Audio alarm eventually stopped but exterior light still flashing and I cannot reset due to "dead" keyboard. Help!

john williams
March 2021
you may also want to check that the panel has not lost its power supply from the mains,i.e.is it on a rccd circuit that has tripped?

charles maguire
August 2010
make sure you remove the fuse from spur unit before you open end station

charles maguire
August 2010
check if any pirs (if fitted )are lit,if not then the 12 volt auxily supply fuse may have blown due to cut cable or faulty cell in battery,check the fuses on main board in end station

charles maguire
August 2010

Automatic Answer

We may have found other answers which could help you.

Click here for Keypad Key Pad

Mend Security Systems, Home Alarm Systems
Mend repair fix Veritas 8 home alarm systems

Other models...

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.

Related Categories

Mend Car Alarm Systems
Car Alarm Systems

Mend Security Systems, Home Alarm Systems
Mend repair fix Veritas 8 home alarm systems