just stoped wile I was using it and it will no restart
Roger
May 2009
Turn the machine up-side-down and remove the gearbox cover, 4 torx screws. Remove the cutter, 2 further Torx screws, I found a screw that secures the bottom cover to the engine had come adrift stopping the large gear (about 4 inches in diameter) from turning. Refit the screw using a spring washer or shakeproof washer, why not treat the other screw the same? Slop plenty of grease into the gearbox and re-assemble.
Philip Burbidge
June 2005
sounds like your drive is gone
eamon
January 2005
Automatic Answer
We may have found other answers which could help you.