what could be the problem with my Zanussi aquacycle 1400?
My washer just stopped spinning, i think it went through the wash and rinse, the pump is working (i can hear it) and it's not blocked, i removed the top of the washer and the belt seem's ok, i don't know how to get to the motor to check that can you tell me how?, i am trying to eliminate what it could be, can you please help?
Kind regards Julie.
A Great big THANK YOU to Colin, following your instructions i managed to get to the motor easily and found it was the brushes i have now fitted new ones and the washers working perfect again. Once again THANK YOU. Julie.
Julie Moore
June 2008
the cabinet splits into take lid off and you will see 6 brass screws 3 each side you only need to undo 2 each side the ones towards the back also at the bottom of the back cabinet thre will be 2-3 silver screws to undo and 1 at each side at the bottom under plastic covers. then where the water pipes and mains cable are un need to unclip that plastic housing. hope this helps
colin
June 2008
tip machine back and you will see the motor its at the bottom . check motor brushes
www.asuds-appliance- spares.com
June 2008
I can answer this question...
what could be the problem with my Zanussi aquacycle 1400?
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.