the drum has stopped turning but the motor is still spinning i had a look inside and the belt is fine it looks like the motor pulley has come lose there seems to be a little collar under the pulley any ideas would be appreciated thanks for your time
if you take the back off the drum should pull up and out the top fit the belt at the bottom first then as you put the drum back in slide the belt over
mike
February 2011
thanks for your answer but i think i'm goin to drill and tap the pulley to the motor spindle i triyed gluing it which did work untill it started heating up and the glue unstuck.
j pierce
March 2008
ive never tried to put a pully back on one of these.they are crimped on during manufacture.always needed a new motor which is almost the same price as a new dryer.