How do I clear error code E00 on Bosch maxx 6 washing machine?

I used Gwyn's advice to clear error coded E16. Thanks. All the other sites said replace £80 Board. ;)

Namib
October 2021

thank u gwyn

calvin
May 2021

It means overloaded when you put too many items in machine, and when it soaks in water it makes too heavy for a spinner. to protect bearings and belts sensors will stop operation, letting you open door to remove some or all items.
Sorry I do not have experience 30+ years but it easy to work out, especially with your expirience ...

geo
July 2020

I do I clean an Error E:00 in a Siemens machine wash and dry IQ700
It seems related to excess of foam, but the programme ended.

João
May 2020

Merci beaucoup ..... enfin un site qui donne des vraies solutions!!!
De plus la procédure fonctionne aussi sur un Bosch maxx7 varioperfect!
Thank a lot
Un frog qui vous veut du bien!!
Simon

Simon
February 2018

I am not sure it works for every Bosch washer.
In my case I keep pushing the start button and turned nob around.
When the nob was set in perm press heavy soil, my machine was started to work normally .
I recommend to stay each menu at least 2 second with pushin start button at the same time.
Hope it works out for you.

Henry Kim
December 2017

this also solve my problem on Bosch maxx 7

Hassan
July 2017

Just had this on machine less than 2 years old. Bosch engineer had never seen it before and couldn't find a fault but said to clear it push and hold the start button while switching the knob from off to the 1st position left [easy care 30]. Hold for a few seconds until "888" is displayed. Turn knob back to "off" and display should be back to normal.

Gwyn
July 2016