The usual wiring for white knight dryer elements is as follows....looking at the element one end of each ring is connected together by a welded bracket which has 1 tag, on this tag goes the light blue lead from the overheat reset thermostat, the middle leg of the elements has a red lead on it, the leg the opposite end to the blue one mentioned above has a small black lead from the timer and a black lead from the thermostat situated on the element plate. if your lead colors match the above then this is how it is connected.cheers . ( ps best to take photo of connections on anything before disconnecting)
Kenjo
October 2014
howtomendit.com for free repair help, information and advice.
