zanussi fjs1225w error code E40?

Turn the power off, unplug the machine and take the top off your machine and on the front right of the machine there is a plastic case with lots of wires.

Put the wires out one block at a time, keep putting them in and out, this will help the connection to seat.

Try the machine again and the problem should be solved.

If not you may need a new board.

Gavin
August 2008

Hi Phil many thanks for getting back so soon fault was wire of the main PCB,

Ian Cruickshank
November 2006

E40: Door open, Interlock, wiring or main PCB
most likley going to be faulty door interlock

phil grimshaw
November 2006