how to repair an erroe code of E 08 on a electrolux wascator dryer T3190?

Thank you the black button with the 2 white wires does the job.

Umer
September 2019

thank ou mate!!

Imagination
December 2012

Thankyou so much got me out of a big mess and my boss will be happy that iv saved her a call out charge

steve briggs
November 2011

For all that cannot find the red buttons:

Take the top cover away, look at the back (with your head above the machine) down, there in the middle on a metal plate covering the drive belt, you see a black round switch with a little dark red button and 2 white wires connected to it, this is a thermal resettable fuse. Push this, you almost don't feel it go, but it will sound a little soft click.
To check if there are more fuses that can be reset, check how much wires go from connector P6(a) (on the upper side and little to the left, of the controller board) and follow these to the switches and reset.

Mine had only the one discribed.

check if error is cleared and replace top cover.

Of coarse needless to say that one should CLEAN the filter regulary from preventing this to happen.

BenGenaaid
August 2011

Thank you Sergiy. Problem solved. :)

ok98
December 2010

Dryer had been overheated (clogged or damaged air filter). Reset 3 thermo-fuses (small red buttons): 2 under top cover and 1 under back side round cover.

Sergiy
December 2010

The code E08 stands for 'Overheating in-/output'. There is nothing to do but to call in a service technician.

zehdro
July 2010