Other users of howtomendit.com provide the answers. The more detail and information you provide in your question the easier it is for others to help you.
About us
howtomendit.com is a free website which can help you find information help and advice to help you fix or repair just about anything.
You ask your question.
Others will try to help you.
See how simple it is. Click here to ask a question.
Last month I asked for help with my 2 - 3 year old machine, which has never filled high enough to do a good wash or rinse. Someone replied that I should turn the adjust screw a couple of turns (thanks!). Got round to taking the top off and turning the adjusters. Just a fraction of a turn clockwise has done the trick for wash level but rinse level is now way too high! Unfortunately there are three possible adjusters - bottom one for small flat blade (adjusted) and two immediately above for star/torx blade which did not seem to do anything so I turned them back to roughly their original settings. Do I have a faulty switch or can I get all levels right by turning the appropriate screw? If the latter, which adjusts what and does clockwise increase (as I think) or lower the level? The problem is compounded by the machine apparently adjusting levels dependant on load!....
Bob Fletcher November 2009
Answers will appear here when the question above is answered. (No answers have been added yet.) Can you help? Click here to add an answer.
Add
an answer
Can
you add an answer to this question? Complete the form below
...
Attempting
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.
Bob Fletcher
November 2009
Can
you add an answer to this question? Complete the form below
... 
2003 .