Other users of howtomendit.com provide the answers. The more detail and information you provide in your question the easier it is for others to help you.
About us
howtomendit.com is a free website which can help you find information help and advice to help you fix or repair just about anything.
You ask your question.
Others will try to help you.
See how simple it is. Click here to ask a question.
E2 Error code
Stopped in the middle of a wash cycle and displayed E2 error.
Clothes are wet and the supply hose is pressurized so water is available to the machine
Any ideas?
Nev October 2009
E2 signifies a motor fault, (except in this case it was a supply induced main board error).
Quick Fix - Press and hold the Start/Pause button till the display flashes "8888" then turn the Selector Knob COUNTER CLOCKWISE One Click (ie to the last available program setting). Turn off the machine and restart.
If the motor is faulty it may immediately return to "E2" Error mode, or you may be able to limp through a few loads (or at least finish the current one).
For me the fault was due to the power company's ripple control upsetting the electronics. The board is to be replaced under warranty to prevent further issues.
Nev November 2009
Add
an answer
Can
you add an answer to this question? Complete the form below
...
Attempting
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.
Nev
October 2009
Can
you add an answer to this question? Complete the form below
... 
2003 .