Help with Citroen Picasso Dashboard Lights?

my speedo light has stoped working

john
December 2018

my car is always difficult to start in the cold, but this morning while it was labouring and turning over, it flashed up REG ON and started bleeping, then refused to start. what does that mean?

gaffer
February 2015

Hi i have citreon Picasso with one side of dash completely out. I replaced bulbs then turned on engine and it started smoking!! Put new bulbs in on that side again and its in darkness. Can only read display in the day time. Completely dark of a night!! Please help!!

tonya
July 2014

I have a citroen Picasso 05 and my mph numbers are only showing half of a number can any one help

debbie
January 2014

hi i have a citreon picasso with a problem it has no dash lights and no diels work all out side lights work but nothing on dash has any ane ot any idesa what this coould be really need sum help plz

hazel
June 2013

i have a citron picasso zsara 2001 . i saw a sign of a car with 3 drops of oil/water on the dahboard.

please tell me what does it mean

boopathy
December 2012

All my dash lights (except heating) and radio went out a year ago. One Bristol Citroen dealer assured me he knew what the problem was and it would cost £840 to repair, driving home in shock I hit a pothole and the lights came back on and worked well until yesterday, Now they have all gone out again, very frustrating! Drove fast over speed bumps to no affect unfortunately. There was a rattle coming from dash last week, covinced it's not a bulb problem.

Mary
February 2012

i have a picasso 16cc ,the dashlights went off the other day when i was driving and the engine management light came on then about a few second it came back on.this then happend again twice today the car is still running fine even with it happens need help grrrrr!

STUART
February 2011

how do you get dash bulbs out of a picasso

Graham
February 2011

This just happened to me and my garage pluged in its computer to the car.
It came up with (No conection to dash ) He just reset it and it is fine now fingers crossed.

George Lambert
July 2009

Hi Take the display unit out pull out the two wiring plugs then twist and pull out the small bulbs and fit newones
its like a xmas tree 1 bulb goes the lights stay on 2 bulds go all the lights go out

Brian Gordon
June 2009