Hotpoint CTD85 tumbledryer: F10 error code?

Wow! I just saved myself £60 two weeks before Christmas. Very proud of my repair! Thank you so much for such easy to follow instructions. Tumble dryer working perfectly. Thank you.

Nina.
December 2019

May I ask how many times can we reset the thermostat??

Maria
October 2018

Many thanks to Dean, Trevor for resolving this problem as my wife is really happy now. I did follow the instructions as you've wrote down in this forum and it was a loud click then I put it back together and tested it, Hurrah.... working like a new one.

Many thanks
Omar Nasir

Omar Nasir
July 2012

Dean,

You are a star!
I followed your instructions and it worked for me too!
Thank you very much!

Aris
January 2012

Take off plastic back panel in centre of machine at rear attached by two screws. Then remove the raised panel which is attached by approx 8- 10 screws. inside this panel is the thermostat which is then removed by two screws on the raised panel. Once removed, you will see three small disks. one of the disks has a hole in the centre. press the hole with a pin and you will here it click. put back together, and your thermostat has been reset.
Make sure you have cleaned all vents, as this may have been the cause for the thermostat tripping in the first place.

Dean
October 2010

Trever, would like to personally thank you for this advice - it worked a treat, Having just been made redundant the thought of having to buy a new machine was just not high on the priority list. - Many Thanks..

Alan
August 2009

It needs resetting.

Take off the back panel and the on the back of the panel is another panel with 2 screws. undo those and you will see 2 disks, 1 white, 1 brown/black. The brown/black one will have a hole in the middle. Poke a pin into the hole and you will hear a click. The machine is reset and just reassemble the panels

trevor white
May 2009