remove 10mm bolt on top of headlamp. partially remove bumper, two 10mm bolts either side of headlamp. to partially remove bumper- 10mm or torx 30 under wheelarch at corner of bumper, 2 clips underneath bumper holding wheelarch liner, may have to undo 3x 20 torx screws underneath front bumper going along front. then pull corner of bumper where screw removed and bumper should pull over bonnet catch and away enough to undo two 10mm bolts. careful not to scratch bumper when its hanging off.
me
April 2009
howtomendit.com for free repair help, information and advice.
