Bosch Washing Machine error code "E"?

Yep, this advise above: Usually it is a program that got stuck. These machines use software and like pc can get a glitch. Shut machine off. unplug and plug it in. select "refresh" and then start it should run a program for 15 min or so and then after that it should be fine. This worked right away for me. Thank you Paul. Your a Blessing Man! All the best.

Michael
June 2021

the key is patience. Here is what worked for me:
0. open the door (mine is a front loader).
1. press "allergy rinse" and "spin selection" and keep them pressed.
2. turn knob to the left on "Perm Press cold".
3. wait for a single beep. the error "E:" keeps flashing.
4. turn knob to "off", and let go of the buttons.
5. do nothing. Get a coffee or something.
After a while the error cleared and the washer now works.

DeeBee23
June 2018

Where is refresh? Also I pulled on the door open plastic but it did not open, do you have to pull really hard?

Panda
January 2016

I'd like to asking you please, is there any technician can help me in my issue, I have problem in my Bosch Maxx7 washing machine shows error in display as ( -0- ) code, In the first time when I turn the knob switch of washing machine to any program wash show me on digital time 40 then a few second suddenly showing -0- code with pep sound I tried to get from How to Identify Bosch Error Codes list but I didn't get this code through it !!
could you advise me please?

Ziad
May 2015

Tried the power off and Refresh and it worked perfectly. Thanks for the help.

John Lloyd
October 2013

error code "E" was the door lock failure, and need to replace the main board & door lock Assy to fix the problem.

Jerry
April 2010

I have the same problem, I plugged it off, waited, plugged it back in, refresh and start.. same difference, did anyone find a solution other than the one recommended for this?

new homeowner
November 2009

Usually it is a program that got stuck. These machines use software and like pc can get a glitch. Shut machine off. unplug and plug it in. select "refresh" and then start it should run a program for 15 min or so and then after that it should be fine.
If it doesn't work call a technician

paul
July 2009