Is there a list of the AEG OKO-LAVAMAT 74620 error codes eg C1, C2, CE, CD?

Had an C2 today and suspected ice, as we had ice in inlet hose yesterday, but a thorough rinse of filter fixed the problem without reset!

ØyvindSP
February 2012

whots error has name: E34????

Piotrek Poland
May 2008

The water won't drain from my Hotpoint Washer - how do I check to see if the drain pump is blocked?

cheryl
December 2006

C 09 brushes are worn out
C E water dispenser faulty. Gears stripped, you will need to replace the complete unit
C D door not shut
C 1 as above
C 2 as above

Some codes require a machine reset. The following works on my machine:
Set selector switch to off
Hold in "pre wash" and "soaking" buttons together
Turn selector switch anti clock from "off" to "short spin"
Turn selector switch clockwise to "energy saving"
Machine should then be ready to use

Dave
April 2006

c1 The water is closed - open up the tap
The inlet hose is blocked - unscrew hose from tap, remove filter and clean under running water
c2 washing has not spun enough, there is water left in drum
a) kink in outlet hose
b) max pumping height is exceeded
c) drain pump is blocked
d) water drainage system is blocked

mrs w
November 2005

A follow up, we get a CE code when on a wash cycle, it doesn't seem to take water in, it will spin, etc,,,
thanks
Andy

Andy
October 2005