Peugeot 406 remote key fob?

just I want get programme for remote

sani danhalac
July 2014

have got two remote control fobs for my 2003 both will lock the central locking system when inserted but will not operate the locking system remotely, to be honest I have tried all the mad cap ideas suggested and nothing works.

noidea
April 2013

is it easy to fit new buttons on my 406 key fob they both perished but the key itself is fine would be glad of any help

Geoff W
December 2012

a peugeot dealer only charges £23 a key if the key works fine (battery ok) and only needs programmed to the car ive tried to disconnect and everything so in the end i paid the £46 for both keys and it all works fine.

andy
July 2012

My key fob doesn't work. The central locking works when key inserted into lock. If key left out ignition for few seconds I press the lock button and the speedo pin moves and followed by short clicking noise. Any ideas what's wrong would b grateful.

Anthony
July 2012

programyourkeys.com Helped me. Thanks to the man created it and thanks to steve graham posting it here.

http://www.programyourkeys.com/Peugeot_406_Reprogramming_Key_Remote_Control_Plip_Instructions.html

mario
March 2012

MY 406 locks went awfual after some snow: very intermittent remote locking and pretty dodgy with the key. I thought that taking the locks out and dousing them with oil would sort it all out: Wrong! The key worked fine but still no remote. Tried all the resetting tricks (didn't go as far as disconnecting the battery, I admit), changed the battery in the key but to no avail. Then the remote key was lost for a fortnight, and when it was found again it worked perfectly. So try chucking the key down the back of the sofa for a fortnight and using the spare. Failing that, stop trying to push the remote button for a while.

Dave, Hastings
March 2011

The last one defo works for my 2002 2.0HDi, ignition on, press and hold lock button within 10 secs for at least 30 secs. hey presto, all good.
cheers,

Ian.
February 2011

Thank you for this advise. My spare key would not work originally but now it does perfectly. Saved me £140!

Shropswan
January 2011

just put the key in the ignition turn key till the lights on dashboard come on and held the button down on the key for 30 sec. and it worked..
1998 406.

lee
December 2010

This worked for me:
- disconnect battery for 2 mins,
- put key into second position (all electronics on),
- press shortly once,
- press shortly twice,
- turn off and take key out...
and voila!
Thanks guys for the inspiration.
406 1.8 16V 2002 one button key

peugeot-owner-since-1993
October 2010

I just disconnected the battery and then reconnected. After this both keys worked as normal. Perhaps I was just lucky.

cherrybee
September 2010

My two-button remote key fob for a 2000 Peugeot 406 stopped working remotely (but worked fine in the locks). The manual did not help much, because it said "hold down button A until the indicator light B stops flashing. release the button, the indicator light is lit continuously". It wasn't. It took about two minutes for light B to stop flashing, but then it was off (not lit continuously).

Instead, I pressed both buttons down at the same time. Within thirty seconds light B was indeed lit continuously. I then took the key near to the car and pressed button A twice, switched on the ignition for five seconds, turned it off again, and hey presto -- remote works again.

Theo
May 2010

I tried the above (except disconnecting the battery) and to no avail. Any other ideas?

Jono
April 2010

Disconnect batt for one min.

Reconnect and enter car with key.

You will need to program both keys at the same time. (or one twice if you only have one)

Insert key in ingnition and turn on (do not start the engine)

Within 10 seconds press the large button on the key in the ignition

then press the large button on the second key.

If only one key use that one twice.

Then turn off the ignition.

Both plip keys should now work.

HumanPenguin
March 2010

sombody now how much is for new fob key to peugeot 406 coupe 1999 my key complatly broke and i dont know what to do.Can i buy some second hand key and use for my car ???? thanks

bart
March 2010

Tried pressing the button on the fob while the ignition was on but still wont work, any other solutions???

Hugh
March 2010

My 407SW fobs stopped and the dealer wanted £117 to replace one, with no guarantee it would work. Followed advice to disconnect and then reconnect battery, then followed handbook reprogamme procedure - now works fine.. Thank God for the Internet..

Only one Fob works at any one time though.. I'll manage..

Geoff
November 2009

The remote for my peugeot 406 could not lock and unlock my car door until i tried what the Peugeot master technician said and it worked. I can now lock and unlock my car door with my remote.
Thanks Peugeot master technician.

Larry
October 2009

go to www.programyourkeys.com hope this helps.

steve graham
October 2009

i have a single button fob for 406 1996 model. botton is missing and wont work have to lock using door. can i get a 2 button rf one from ebay and reprogram it to work.

rick
January 2009

the button on my key fob is missing the fob still works if i put my finger in the hole.what i want to know is can i have a new button put in or do i need to buy a new complete key.i hope u can help me

m.j
October 2008

Ive tried every key press sequence i can find on the internet and in peugeot manuals, It was disconnecting the battery that started the problem, everything was fine until then, If the car is left for a few minutes, and then the key fob button is pressed, the speedo and tacho needles flicker, and a click can be heard from the BSI under the dash, so 'i think that the car is receiving a signal, any ideas would be much appreciated.

0lly
October 2008

Hi I have had a similar problem with a Peugeot 407. I tried this but did not work, took the car to my dealer who tried various things to recode then told me £117.00 for new fob and £78.00 for second key if bought together. They assume both fobs failed at same time which I think is totally illogical. On getting home I disconnected and re connected the battery and recoded keys both now work fine.

David Smith
September 2008

Turn Ignition on within 10sec press and hold locking button on blip for 30 seconds release button turn off ignition and it should work

Peugeot master technician
September 2008