3 hours ago: Throttle issue?

Mend Nissan In-Car Audio

Mend Audio, In-Car Audio
Find out how to mend it for free.

Ask Question
Mend Audio, In-Car Audio
Click here to mend Nissan in-car audio

Mend > In-Car Audio

Mend Audio, In-Car Audio

NISSAN MICRA RADIO WONT UNLOCK?

I HAVE A NISSAN MICRA 1996
I HAVE THE RADIO CODE BUT IT WILL NOT LET ME ADD IT.
THE RADIO JUST SAYS SECURE AND NO MATTER HOW LONG I LEAVE IT ON IT WILL NOT REVERT TO SAYING "CODE".
ANY TIPS?

CHRIS UREN
September 2005
Unfortunately I do not have the code but would be happy to enter a new code

Many thanks.
June 2023
hi, the screen just says locked and not giving me the option to put the code in, can u help please ?

Gerry Conway
January 2022
Nissan micra I have the code but it wont un lock it just says weit 1hr can some one help me plz

tony
March 2015
Nissan Pulsar 2004, How do you add a number 7 or 8 on the stereo to unlock it?

Belinda
March 2014
After I have put the radio code in my nissan Micra 04 what do I do next ? Which button do I press to save it ?

Deb
July 2013
Www.radio-code.lt

Stevefennell
March 2013
Nissan radios are protected by 2 different systems. Initially each radio is set to match the original vehicle ECU (engine computer unit) like the car key. This can be set only by the radio's internal computer. To unlock this safety measure
you need a real expert or the goodwill of Nissan company. The second lock is a 4 figure code that you have to key. In case you remove the radio and put it back again you will be asked to key a code. This code you can get free from any Nissan dealer if you prove ownership.

Alex P
April 2012
Have just bought a 04 plate Nissan micra but need to get my stereo remove in order to obtain the code. I have been to lodes of garages who cannot do it ( remove the stereo ) and the dealer has quoted me £107 for the whole process which is a lot of money. I was recommend to go to a radio store who quoted me £70 £40- reset the code and £30- to remove the stereo at these rate I could buy and get a new stereo fitted.

Question is their 1 universal code for a new shape 2004 se or does each car have it's own code? I would like to find a cheaper way of solving this problem. I have contacted the dealer who
cannot locate my info and I do not have a book either nor have I Got access to my pervious code. What do you recommend I should do any advice would b most helpful.

Red'z
May 2011
i have nissan micra 2005 urbis model i dont have seral number and my radio need code an it is defecal to remove it anyone can help plc.

ahmad
April 2011
you need a large hammer just hit the back of the radio as hard as you can that will cure it

glenn
March 2011
nissan radio wont unlock?

dave
July 2010
i have my nissan micra radio code but there are only digits upto 6 but code contains 7.plz can someone tell how i can put 7????????

jaidi
December 2009
Does anyone know what the standard code is?

nabz
March 2009
We have this problem with an 03 plate, battery been flat, accepts code but says wait 1 hr then just reverts back to 0000. Any ideas

nuttymummy
January 2009
i have 2004 nissan micar i need radio code thats all

roohany
December 2008
you sure its not code in?
which is the security code for the raido. this happens when your battery dies and it resets which require you to input the 4 digit code. which can be found in your manual hope this helps

thir13en
December 2008
what nissan rddio is it model number?

some of these have been programmed with car immo so dealer otherwise can be done on workbench but not for talk here

harry
December 2007
micra 2000

vito
September 2007
i have nissan pulsar lx 98,i have the same prob too.i have the code but still i cant use it for a long time....the stations keeps on blinking then after few seconds,it ask again for the code.anybody knows how to unlock my cd stereo...its original from nissan pulsar.

raymond
June 2007
go to the dealers

mr tom
February 2007
Remember to leave the radio on though! Saves an hour of waiting for nothing...

Tom
January 2007
I have the same problem! Where do you find the code to put in?

Jack

June 2006

Jack
June 2006
You will need to leave the ignition on to the first turn of the key (IE. before the lights come on) for up to an hour. The display will then change to CODE and you can put in your code.

Joe
October 2005

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Radio Code Secure

Mend Audio, In-Car Audio
Click here to mend Nissan in-car audio

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Audio, In-Car Audio
Click here to mend Nissan in-car audio